Course Overview
Projects-based BIM OpenPlant Modeler and P&ID Training will impart the necessary knowledge and skills for aspiring and existing Built Environment professionals to create technical designs/drawings in OpenPlant Modeler and OpenPlant Piping and Instrumentation Diagram (P&ID). Learners will read and visualise plant facility drawings, understand the operation and interface of OpenPlant, set up a new project, model plant components, and equipment, and generate BIM documentation for submission.
What you’ll learn
![]()
LO1. Read and understand plant facility drawings and instruments
![]()
LO2. Set-up a new P&ID project
![]()
LO3. Place equipment and nozzles in OpenPlant P&ID
![]()
LO4. Create pipeline and pipe run in OpenPlant P&ID
![]()
LO5. Create inline and online components
![]()
LO6. Create annotations and connectors
![]()
LO7. Validate and publish P&ID model
![]()
LO8. Set-up a new project in OpenPlant Modeler
![]()
LO9. Model plant equipment such as pumps, exchanges, and nozzles
![]()
LO10. Model pipes, its components and fittings
![]()
LO11. Check for pipe connectivity
![]()
LO12. Conduct clash detection on plant design
![]()
LO13. Create custom plant equipment in OpenPlant Modeler
![]()
LO14. Generate bill of quantity from OpenPlant model
![]()
LO15. Develop 2D drawings from OpenPlant model.
![]()
LO16. Create i-model from OpenPlant Modeler
Why should I attend this Course?
![]()
OpenPlant is one of the commonly used tools by contractors and consultant firms of Singapore’s Built Environment who participate in utility projects, such as the Tuas Water Reclamation Plant and Deep Tunnel Sewerage System (DTSS) Phase 2.
![]()
Suitable for practitioners who are involved in the creation and management of information-rich 3D plant models.
Duration
![duration]()
3 Day(s) × 8 Hours = 24 Hours
Classroom and Practical: 20.5 Hours
Assessment: 3.5 Hours
Certificates
![]()
WSQ Statement of Attainment
![]()
Bentley Certification
Funding
![]()
SkillsFuture funding is available for this course and applies till 30 October 2026. For details on how funding is available to company-sponsored learners and individual sponsorship
![]()
The fee here represents the indicative nett fee payable after funding. Please check with Ace Industrial Academy Pte Ltd on your eligibility and payable nett fee, and applicable GST.
![]()
For bulk sign-ups with at least 5 learners, please contact us directly.
Assessment
![]()
At the end of this course, learners will go through an assessment.
![]()
Learners who achieve the Course Completion Requirements will be accorded a WSQ certificate.
Entry Requirements
![]()
Recommended for individuals with at least a Diploma in relevant course of study (i.e. engineering / architecture / green building & sustainability / any built-environment related course
![]()
English language proficiency at GCE ‘O’ level of C6 and above, or WSQ Workplace Literacy skills of Level 6 and above.
![]()
Proficient with the use of a Windows-based computer for work.
![]()
Completed Ace Industrial Academy’s Projects-based 2D and 3D MicroStation Training for Built Environment Professionals course or its equivalent.
![]()
No prior working experience required*.
![]()
*Learners who do not qualify in terms of education but have at least one year working experience in the Built Environment will be admitted on a case-by-case basis.
Course Fees
| Fee Category | Description | Amount |
|---|---|---|
| Full Course Fee | S$1,050.00 (full price) | |
| Nett Course Fee (before GST) | Singapore Citizens (SCs) and PR | S$525.00 (50% of course fees) |
| Nett Course Fee (before GST) | SCs aged 40 years and above SME company-sponsored | S$315.00 (30% of course fees) |
| Nett Course Fee (after GST) | Singapore Citizens (SCs) and PR | S$619.50 (50% + GST) |
| Nett Course Fee (after GST) | SCs aged 40 years and above SME company-sponsored | S$409.50 (30% + GST) |
About Course
Training Mode
Classroom
Course Code
TGS-2022017156
Skill Code
BEV-TDR-3005-1.1-1
Skill Code Name
Technical Drawing Level 3
More Courses like this
Professional BIM & CAD Training
Customised Training Plans
Our modular courses are tailored to your project requirements
Experienced Trainers
Over 20 years of exprience in BIM Training and Certifcation
Up-to-date Curriculum
Our training standards allow us to qualify as an Autodesk Authorized Training Center and Bentley Training Partner
See what past and current Students say about us
Classes are very clear and trainers teach at a good speed. Funny as hell too.
Nurisha Bte Abd Wahab
Student
Good, short, sweet, and perfect
Chan Ze Xian – Batch 257
Student
