Revit MEP Training Course – CSD

The Revit Combined Services Training is targeted at BIM Coordinators and BIM Manager. The BIM Coordinators and Manager will be trained to identify and resolve clashes between the different Revit services such as Revit Archi and MEP. Ultimately, the BIM Coordinators are to produce the clash reports.

Next Start Date: 02/01/2021

Trainer: Kee

1 Day

duration

All

Skill Level

$300

Course fee

course overview - learn revit mep csd

Trainees will learn to coordinate designs by linking Architectural, Structural, Electrical, and Mechanical models. Using Revit collaboration tools and Navisworks, they will then learn to (1) identify clashes, (2) resolve clashes between the different services, and (3) produce clash reports. Towards the final stages of training, the Trainee will be able to produce a Combined Services Drawing (CSD) ready for submission and documentation purposes. A Certificate of Completion will be issued to each Trainee at the end of the course.

Course curriculum

Day 1: Lecture + Practical

Coordinating Design in BIM
Introduction to Combined Services Design & Coordination
Coordinating designs
Introduction to Clash Detection Using Revit
Using Revit Interference Check (RIC)
Hands-On Practice on running RIC
Interoperability: Exporting Revit to Navisworks format
Transiting from Revit to Navisworks
Introduction to Navisworks
Navisworks Manage User Interface
Grouping of Selection Sets to required clash checking categories
Using Navisworks Manage for Clash Detection
Navisworks Switchback
Navisworks Redline, Measure and Add Comments
Navisworks Viewpoints and Sectioning
Comparing Revit and Navisworks Clash Reports
Navigation Wheel for visual checks
Animation
Quantification – QTO and BOQ
Project case studies involving clashes and coordination
Clash Detection Matrix and Clash Resolution Workflow

The Authorized training partners for

register your interest today

Get detailed information on available training slots, course fees, and subsidies within 1 working day. Remote training options available on request.

Contact

Adress: 159 Sin Ming Rd, #05-03 Amtech Building, Singapore 575625

Call directly:

64559938

Connect to:

[email protected]

More Courses

You might also be interested in these courses

OpenBuildings Designer Training Course

Trainees will be introduced to the OpenBuildings User Interface, and learn the basic operating functions and tools (e.g. Elements/Families, Settings, Views) on a step-by-step basis.
04/01/2021
OpenPlant Modeler Training Course

This course is useful for BIM modelers, coordinators, managers and drafters to understand the basics of this software and to deliver integrated designs with modeled pipes, equipment, supports, instrumentation, HVAC and other MEP related items. OpenPlant Designer Training Course enables 3D design of Piping, HVAC and electrical equipment, including the setting up of models, routing pipes/cable trays to modelling of custom equipment.
07/01/2021
MicroStation Training Course – Basic

During the Basic Microstation Training Course, engineers will be introduced to the Microstation User Interface using the basic operating tools in 2D & 3D drafting. The Basic Microstation Training Course aims to guide engineers on a step-by-step basis. Other Microstation TWRP related training services include OpenPlant, OpenRail, OpenRoad and AECOsim
04/01/2021
OpenRail Designer Training Course

Trainees will also explore the wide array of fundamental modelling features used to model tunnel, viaducts, and rail track and accessories equipment from a Structural discipline.
11/01/2021
MicroStation Training Course – Intermediate

During the Intermediate Microstation Training Course, engineers will be guided on the drafting requirement and formatting of the drawings in compliance with the National CAD Standard CP83. This Intermediate Microstation Training Course is targetted at engineers who have the basic knowledge of Microstation. Other training for TWRP and LTA related projects are OpenPlant, OpenRail, OpenRoad and AECOsim
07/01/2021
AutoCAD Training Course – Advanced

During the AutoCAD Advanced Training Course, engineers will be introduced to a 2D isometric drawing as a bridge towards visualizing and drafting in 3D using the AutoCAD software.
23/01/2021
AutoCAD Training Course – Intermediate

During the AutoCAD Intermediate Training Course, engineers will be guided on the basic drafting requirements and formatting engineering drawings in compliance with the National Standards and Requirements (CP83) using the AutoCAD software.
21/01/2021
AutoCAD Training Course – Basic

During the AutoCAD Basic Training Course, engineers will be introduced to the AutoCAD software Interface and taken through the basic operating function tools in 2D and 3D drafting on a step-by-step basis.
18/01/2021
AutoCAD Training Course – Tips and Tricks

During this AutoCAD Training Course, engineers will be guided on the tips and tricks to using the Autodesk AutoCAD software application.
27/01/2021
Revit MEP Training Course – Electrical

During the Revit MEP Electrical Training Course, engineers will be exposed to a wide array of fundamental modelling features. Other Revit MEP Training Services we offer include Revit ACMV, Revit Architecture and Revit CSD.
31/12/2020
Revit MEP Training Course – Fire Protection

During the Revit MEP Fire Protection Training Course, engineers will be exposed to a wide array of fundamental modelling features. Other Revit MEP Training Services we offer include Revit ACMV, Revit Architecture and Revit CSD.
30/12/2020
Revit MEP Training Course – Plumbing & Sanitary

During the Revit MEP Training Course for Plumbing and Sanitary, engineers will be trained on how to configure mechanical settings, control visibility, set up projects, manage templates and perform batch copy for plumbing fixtures. Other Revit training services we offer include Revit ACMV, Revit Fire Protection and Revit Architecture
29/12/2020
Revit MEP Training Course – ACMV

During the Revit MEP ACMV Training Course, engineers will learn to configure mechanical settings, control visibility, set up projects, and manage templates. This will ultimately improve their competency on Revit Architecture & Revit MEP.
28/12/2020
Revit Architecture Training Course – Advanced

In this Revit Architecture Advanced Training Course, engineers will further explore the different modelling features and tools used to create more sophisticated Architecture elements. This advanced training course is targeted at engineers who have basic knowledge of Revit Architecture. Other Revit Training services include Revit MEP, Revit Structure and Revit ACMV Fire Protection.
23/12/2020
Revit MEP Training Course – CSD

The Revit Combined Services Training is targeted at BIM Coordinators and BIM Manager. The BIM Coordinators and Manager will be trained to identify and resolve clashes between the different Revit services such as Revit Archi and MEP. Ultimately, the BIM Coordinators are to produce the clash reports.
02/01/2021
Revit MEP Training Course – Documentation

During the Revit MEP Documentation Training Course, engineers will be trained on how to produce Construction Documentation for quantity takeoff, sheet layouts, creating duplicate views for documentation.
12/02/2021
Revit Structure Training Course

During the Revit Structure Training course, engineers will be introduced to the Revit User Interface. They will be trained on how to create a full Revit structural model using the basic Revit operating functions and tools such as Elements/Families, Settings and Views.
05/02/2021
OpenRoads Designer Training Course

Explore the wide array of fundamental modeling features used to model tunnel, flyover, and Roads lane and accessories equipment from Structural discipline.
MicroStation Course – Tips & Tricks

In this Microstation Training Course, engineers will be learning the Tips and Tricks of the Bently Microstation V8i software. This Microstation software is highly utilised in the AEC (Architecture, Engineering and Construction) Industry. Other Microstation Training for LTA projects include OpenPlant, OpenRail, OpenRoad and AECOsim
30/12/2020
MicroStation Project-Based Training Course – Advanced

The Advanced Microstation Training Course aims to guide engineers on the drafting requirement and formatting of the drawings in compliance with the National CAD Standard CP83. This Advanced Microstation Training Course is targetted at engineers who have the basic knowledge of Microstation. Other Bentley products training services include Open Plant, AECOsim, OpenRail.
02/11/2020